Location and Size of the Reverse Hill-Sachs Lesion in Patients with Traumatic Posterior Shoulder Instability.

BACKGROUND: In patients with traumatic posterior shoulder instability, little is known about the precise location and size of the reverse Hill-Sachs lesion. METHODS: Forty-nine shoulders of 47 patients with traumatic posterior instability were included in this study based on the following inclusion criteria: 1) a primary or recurrent traumatic posterior shoulder dislocation, and 2) the initial event was caused by trauma. Patients were excluded if they had: 1) no history of trauma, 2) prior shoulder surgery, 3) no CT examination, or 4) seizure cases. Three-dimensional images of the humerus reconstructed from CT images were reviewed using an image analysis software. The location and size of the reverse Hill-Sachs lesion were measured and described on a clock face on the humeral head. RESULTS: The reverse Hill-Sachs lesion was observed in 25 of 49 shoulders (51%). The reverse Hill-Sachs lesions were located between 1:37 and 2:48. The depth of the reverse Hill-Sachs lesion (mean ± SD) was 5.8 ± 2.2 mm. The extent of the reverse Hill-Sachs lesion was 35° ± 12°. The average orientation of the reverse Hill-Sachs lesion, represented by an angle measured from the 12 o'clock position, was 64° ± 12° and pointing towards 2:09 on a clock face. Length and width of reverse Hill-Sachs lesions were 9.7 ± 4.7 mm, 11.1 ± 3.6 mm, respectively. CONCLUSION: The reverse Hill-Sachs lesion was a semicircular compression fracture located on the anteromedial aspect of the humeral head. Compared with shoulders with anterior shoulder instability, the humeral defect was smaller and located more inferiorly in shoulders with posterior instability.

When and how much does the muscle strength recover after arthroscopic superior capsular reconstruction?

BACKGROUND: Recently, arthroscopic superior capsular reconstruction (SCR) has been performed for irreparable large to massive rotator cuff tears and excellent clinical results have been reported. Although the muscle strength is reported to recover, it has not yet been clarified when and how much it recovers. The purpose of this study was to determine the recovery pattern of muscle strength after SCR. METHODS: We retrospectively reviewed 35 patients (mean age, 65 years) who met the following inclusion criteria: (1) patients with large to massive irreparable tears of the rotator cuff including the supraspinatus and infraspinatus tendons; (2) those with severe muscle atrophy and fatty change; (3) those who underwent assessment of muscle quality and strength by magnetic resonance imaging and dynamometry at 6 months, 1 year, and 2 years; (4) those with a minimum follow-up period of 2 years; and (5) those without severe osteoarthritis. The isometric muscle strength of scaption (ie, scapular-plane elevation), internal rotation, and external rotation in adduction was measured twice for each motion by a dynamometer. RESULTS: Relative to the muscle strength on the uninvolved side, the involved side showed 61% ± 21% in scaption, 63% ± 20% in external rotation, and 103% ± 29% in internal rotation at 2 years after surgery. Whereas no significant differences were observed between the 1-year and 2-year follow-up assessments, a significant difference in muscle strength of scaption was found between 6 months and 1 year (P = .0174). Graft retear was seen in 5 cases (14%). There was a trend that the muscle strength of scaption and external rotation in the no-retear group was greater than that in the retear group despite no significant difference (P = .0717 and P = .0824, respectively). CONCLUSION: The recovery of the muscle strength after SCR was observed until 1 year after surgery, and the muscle strength of scaption and external rotation returned to 60% of that on the uninvolved side at 2 years.

TiNbSn stems with gradient changes of Young's modulus and stiffness reduce stress shielding compared to the standard fit-and-fill stems.

BACKGROUND: The difference between Young's moduli of the femur and the stem causes stress shielding (SS). TiNbSn (TNS) stem has a low Young's modulus and strength with gradient functional properties during the change in elastic modulus with heat treatment. The aim of this study was to investigate the inhibitory effect of TNS stems on SS and their clinical outcomes compared to conventional stems. METHODS: This study was a clinical trial. Primary THA was performed using a TNS stem from April 2016 to September 2017 for patients in the TNS group. Unilateral THA was performed using a Ti6Al4V alloy stem from January 2007 to February 2011 for patients in the control group. The TNS and Ti6Al4V stems were matched in shape. Radiographs were obtained at the 1- and 3-year follow-ups. Two surgeons independently checked the SS grade and appearance of cortical hypertrophy (CH). The Japanese Orthopaedic Association (JOA) scores before and 1 year after surgery were assessed as clinical scores. RESULTS: None of the patients in the TNS group had grade 3 or 4 SS. In contrast, in the control group, 24% and 40% of patients had grade 3 and 4 SS at the 1- and 3-year follow-ups, respectively. The SS grade was lower in the TNS group than in the control group at the 1- and 3-year follow-ups (p < 0.001). The frequencies of CH in both groups were no significant difference at the 1- and 3-year follow-ups. The JOA scores of the TNS group significantly improved at 1 year after surgery and were comparable to control group. CONCLUSION: The TNS stem reduced SS at 1 and 3 years after THA compared to the proximal-engaging cementless stem, although the shapes of the stems matched. The TNS stem could reduce SS, stem loosening, and periprosthetic fractures. TRIAL REGISTRATION: Current Controlled Trials. ISRCTN21241251. https://www.isrctn.com/search?q=21241251 . The date of registration was October 26, 2021. Retrospectively registered.

Non-operative management of shoulder osteoarthritis: Current concepts.

Glenohumeral osteoarthritis (OA) is one of the most common causes of shoulder pain. Conservative treatment options include physical therapy, pharmacological therapy, and biological therapy. Patients with glenohumeral OA present shoulder pain and decreased shoulder range of motion (ROM). Abnormal scapular motion is also seen in patients as adaptation to the restricted glenohumeral motion. Physical therapy is performed to (1) decrease pain, (2) increase shoulder ROM, and (3) protect the glenohumeral joint. To decrease pain, it should be assessed whether the pain appears at rest or during shoulder motion. Physical therapy may be effective for motion pain rather than rest pain. To increase shoulder ROM, the soft tissues responsible for the ROM loss need to be identified and targeted for intervention. To protect the glenohumeral joint, rotator cuff strengthening exercises are recommended. Administration of pharmacological agents is the major part next to physical therapy in the conservative treatment. The main aim of pharmacological treatment is the reduction of pain and diminution of inflammation in the joint. To achieve this aim, non-steroidal anti-inflammatory drugs are recommended as first-line therapy. Additionally, the supplementation of oral vitamin C and vitamin D can help to slow down cartilage degeneration. Depending on the individual comorbidities and contraindications, sufficient medication with good pain reduction is thus possible for each patient. This interrupts the chronic inflammatory state in the joint and, in turn, enables pain-free physical therapy. Biologics such as platelet-rich plasma, bone marrow aspirate concentrate, and mesenchymal stem cells have gathered increased attention. Good clinical outcomes have been reported, but we need to be aware that these options are helpful in decreasing shoulder pain but neither stopping the progression nor improving OA. Further evidence of biologics needs to be obtained to determine their effectiveness. In athletes, a combined approach of activity modification and physical therapy can be effective. Oral medications can provide patients with transient pain relief. Intra-articular corticosteroid injection, which provides longer-term effects, must be used cautiously in athletes. There is mixed evidence for the efficacy of hyaluronic acid injections. There is still limited evidence regarding the use of biologics.

How much force is acting on the shoulder joint to create a Hill-Sachs Lesion or reverse Hill-Sachs Lesion?

BACKGROUND: It has not been clarified yet how much force is acting on the shoulder joint to create Hill-Sachs/reverse Hill-Sachs lesions which are commonly observed in patients with anterior or posterior shoulder instability. The purpose of this study was to determine the magnitude of force to create these bony lesions using cadaveric shoulders. METHODS: Fourteen fresh-frozen cadaveric shoulders were used. Compression tests were performed using the universal testing machine. The specimens were randomly divided into two groups. In group A, the posterior humeral head (the bare area and articular cartilage) was first compressed against the anterior glenoid rim to simulate a Hill-Sachs lesion, followed by the anterior humeral head being compressed against the posterior glenoid rim. In group B, the same procedure was repeated in the reverse order. X-ray microcomputed tomography (microCT) was also performed. RESULTS: The maximum compression force to create a Hill-Sachs lesion was 771 ± 214 N (mean ± SD) on the articular cartilage of the posterior humeral head, which was significantly greater than the force of 447 ± 215 N to create it on the bare area (P = 0.0086). Regarding the reverse Hill-Sachs lesions, the maximum compression force was 840 ± 198 N when it was created on the articular cartilage of the anterior humeral head, which was significantly greater than the force of 471 ± 100 N when it was created at the footprint of the subscapularis tendon (P = 0.0238). MicroCT showed multiple breakage of the trabecular bone. CONCLUSION: A force to create a Hill-Sachs lesion or a reverse Hill-Sachs lesion was significantly greater when it was created on the humeral articular cartilage than at the non-cartilage area. Also, the force to create a reverse Hill-Sachs lesion was significantly greater than the one to create a Hill-Sachs lesion.

The quantification of muscle activities during arm elevation following reverse shoulder arthroplasty or superior capsular reconstruction for irreparable rotator cuff tears using positron emission tomography.

BACKGROUND: Reverse shoulder arthroplasty (RSA) and superior capsular reconstruction (SCR) are recognized as surgical options for an irreparable rotator cuff tear. However, the postoperative changes of the muscle activity patterns remain unclear. The purpose of this study was to investigate the quantified muscle activities on shoulder elevation in patients treated with RSA or SCR using fluorine-18-labelled fluorodeoxyglucose-positron emission tomography. METHODS: Asymptomatic shoulders that underwent RSA or SCR and those without a rotator cuff tear were analyzed as the RSA, SCR, and control groups. All subjects underwent shoulder elevation exercise, followed by a fluorine-18-labelled fluorodeoxyglucose-positron emission tomography examination. Using previously established methods to quantify the uptake of each muscle on positron emission tomography images, the standard uptake values (SUVs) for 16 portions of the deltoid, rotator cuff, and periscapular muscles were obtained to compare the muscle activity patterns among 3 groups. RESULTS: The deltoid muscle showed the most characteristic differences according to the surgeries. The mean SUVs of the anterior, middle, and posterior deltoid were 3.3, 3.7, and 1.5 for the RSA group; 2.7, 4.2, and 1.5 for the SCR group; and 1.3, 2.0, and 0.9 for the control group, respectively. In comparison to the control group, both the RSA and SCR groups showed significantly increased SUVs at all portions of the deltoid muscle. The RSA group showed similar SUVs for the anterior and middle deltoid, whereas the SCR and control groups showed greatest SUVs at the middle deltoid. In addition, the serratus anterior, levator scapulae, and upper portion of the trapezius in the RSA group showed greater SUVs than in the control group. CONCLUSION: The deltoid muscle showed increased activity in the RSA and SCR groups. The middle deltoid was mainly used in the SCR group, whereas the anterior and middle deltoid, as well as the upward rotator muscles of the scapula, were mainly used in the RSA group.

A stabilizing role of the glenoid labrum: the suction cup effect.

BACKGROUND: The glenoid labrum acts as a bumper, deepening glenoid concavity and amplifying the concavity-compression mechanism, and serves as the scapular attachment for glenohumeral ligaments. The role of the posterosuperior labrum in anteroinferior glenohumeral stability, and the role of the anterior labrum in posterior stability has been debated. The purpose of this study was to quantify the contribution of anteroinferior and posterosuperior labral tears to loss of glenohumeral stability in multiple directions. METHODS: Fourteen fresh-frozen cadaveric shoulders were tested on a custom stability ratio measurement apparatus. The peak force that was required to translate the humeral head in anterior, anteroinferior, posterior, and posteroinferior directions was measured under 5 conditions: intact labrum (n = 14), anteroinferior labral tear (n = 7), posterosuperior labral tear (n = 7), combined labral tear (n = 14), and no labrum (n = 14). The stability ratio was defined as the peak translational force divided by the compressive force. Within force-translation curves, we defined the suction cup effect as the force required to release the negative pressure created by an intact labrum. RESULTS: The suction cup effect was usually present with the intact labrum and always disappeared after removal of the labrum for anterior (100% vs. 0%) and posterior (86% vs. 0%) translations (P < .001). After creation of an anteroinferior labral tear, the stability ratio for posterior direction decreased (P < .001) and the suction cup effect disappeared (P < .001). After creation of a posterosuperior labral tear, stability ratios in the anterior and anteroinferior directions decreased (P ≤ .006) and the suction cup effect disappeared (P ≤ .015). The stability ratio for anterior and anteroinferior testing was more diminished by posterosuperior labral tears than anteroinferior labral tears, and the stability ratio for posterior testing was more diminished by anteroinferior labral tears than posterosuperior labral tears. CONCLUSION: Anteroinferior labral tears decreased posterior stability and posterosuperior labral tears decreased anterior and anteroinferior stability, largely because of loss of the suction cup effect.

Effect of shoulder immobilization position and activities of daily living on the stiffness of the repaired supraspinatus tendon.

BACKGROUND: Although tension on the supraspinatus tendon may be increased by wearing an abduction brace in an improper position or activities of daily living with the operated arm in the brace, the amount of tension has not been objectively evaluated. METHODS: Eighteen patients who underwent arthroscopic rotator cuff repair were enrolled. The stiffness of the repaired supraspinatus tendon was measured with ultrasound elastography to estimate the tension on the repaired tendon. Measurements were performed in 5 immobilization positions (0°, 30°, and 45° of arm elevation in the scapular plane; 30° of arm elevation in the scapular plane+60° (horizontal adduction) and -60° (horizontal abduction)) and 3 static positions simulating drinking, brushing teeth, and dressing. FINDINGS: Stiffness at 30° of scapular plane elevation was lower than 0° of scapular plane elevation (P = 0.034), 30° of elevation in the scapular plane+60° (P < 0.001), and -60° (P < 0.001). There was no significant difference in the stiffness between 30° and 45° of scapular plane elevation (P = 1.000). The stiffness was the greatest at 30° of elevation in the scapular plane-60° among the 5 immobilization positions. The stiffnesses at drinking and brushing teeth were greater than 30° of scapular plane elevation (P < 0.001). INTERPRETATION: Immobilization with the arm ≥30° of elevation in the scapular plane may be an optimal position for minimizing stiffness or tension on the repaired tendon. Drinking and brushing teeth may need to be performed using the non-operated arm to protect the repaired tendon.

Effect of Anterior Glenoid Chondrolabral Defects on Anterior Glenohumeral Stability: A Biomechanical Study.

Background: It is well known that glenoid osseous defects >13.5% of the glenoid width critically destabilize the shoulder, as do labral tears. Chondrolabral defects often occur with anterior dislocation of the shoulder. It is unclear whether glenoid chondrolabral defects contribute to shoulder stability and, if so, at what size they become critical. Purpose/Hypothesis: The purpose of this study was to determine the effect of incremental chondrolabral defect sizes on anterior shoulder stability in the setting of labral deficiency. The hypothesis was that chondrolabral defects ≥13.5% of the glenoid width will decrease anterior shoulder stability. Study Design: Controlled laboratory study. Methods: This controlled laboratory study tested 12 fresh-frozen shoulders. Specimens were attached to a custom testing device in abduction and neutral rotation with 50-N compression applied to the glenoid. The humeral head was translated 10 mm anterior, anteroinferior, and anterosuperior with the conditions of intact cartilage and labrum and anterior full-thickness chondrolabral defects of 3-, 6-, and 9-mm width. Translation force was measured continuously. Peak translation force divided by 50-N compressive force defined the stability ratio. Data were analyzed using analysis of variance. Results: The anterior stability ratio decreased between the intact state (36% ± 7%) and all defects ≥3 mm (≤32% ± 8%; P ≤ .023). The anteroinferior stability ratio decreased between the intact state (52% ± 7%) and all defects ≥3 mm (≤47% ± 7%; P ≤ .006). The anterosuperior stability ratio decreased between the intact state (36% ± 4%) and all defects ≥6 mm (≤33% ± 4%; P ≤ .006). A 3-mm defect equated to 10% of the glenoid width. There were moderate to strong negative correlations between chondrolabral defect size and stability ratio in the anterior, anteroinferior, and anterosuperior directions (r = -0.79, -0.63, and -0.58, respectively; P ≤ .001). There were moderate to strong negative correlations between the percentage of glenoid chondrolabral defect size to the glenoid width and the stability percentage in all directions (r = -0.81, -0.63, and -0.61; P ≤ .001). Conclusion: An anterior glenoid chondrolabral defect ≥3 mm (>10% of the glenoid width) significantly decreased anterior and anteroinferior stability. Chondrolabral defect size negatively correlated with stability. Clinical Relevance: To fully restore glenohumeral stability, in addition to labral repair, it may be necessary to reconstruct chondrolabral defects as small as 3 mm (10% of the glenoid width).

RSPO3 is a novel contraction-inducible factor identified in an "in vitro exercise model" using primary human myotubes.

The physiological significance of skeletal muscle as a secretory organ is now well known but we can only speculate as to the existence of as-yet-unidentified myokines, especially those upregulated in response to muscle contractile activity. We first attempted to establish an "insert-chamber based in vitro exercise model" allowing the miniature but high cell-density culture state enabling highly developed contractile human myotubes to be readily obtained by applying electric pulse stimulation (EPS). By employing this in vitro exercise model, we identified R-spondin 3 (RSPO3) as a novel contraction-inducible myokine produced by cultured human myotubes. Contraction-dependent muscular RSPO3 mRNA upregulation was confirmed in skeletal muscles of mice subjected to sciatic nerve mediated in situ contraction as well as those of mice after 2 h of running. Pharmacological in vitro experiments demonstrated a relatively high concentration of metformin (millimolar range) to suppress the contraction-inducible mRNA upregulation of human myokines including RSPO3, interleukin (IL)-6, IL-8 and CXCL1. Our data also suggest human RSPO3 to be a paracrine factor that may positively participate in the myogenesis processes of myoblasts and satellite cells. Thus, the "insert chamber-based in vitro exercise model" is a potentially valuable research tool for investigating contraction-inducible biological responses of human myotubes usually exhibiting poorer contractility development even in the setting of EPS treatment.

Reliable interobserver and intraobserver agreement of the International Society of Arthroscopy, Knee Surgery and Orthopaedic Sports Medicine (ISAKOS) classification system of rotator cuff tears.

OBJECTIVE: The ISAKOS Shoulder Committee developed a new comprehensive classification system aimed to describe all rotator cuff tears. The five characteristics of the tears included are pattern (P), extension (E), fatty atrophy (A), retraction (R), and location (L), conforming to the acronym "PEARL." The objective of this study is to assess if the ISAKOS Rotator Cuff Tear Classification System is reliable by measuring the intraobserver and interobserver multirater reliability. METHODS: Arthroscopic videos of 36 rotator cuff tears, including tears of varying sizes and configurations, were evaluated twice by four surgeons from different continents blinded to tear type. Intraobserver and interobserver reliability was measured using multirater and intraobserver Kappa coefficients. RESULTS: Intraobserver reliability: An almost perfect agreement for "location" (κ = 0.98), substantial agreement for "extension" (κ = 0.73) were obtained for mean intrarater kappa, lower κ agreement for "pattern" (κ = 0.58), and relatively high agreement of 0.79 for "retraction." Every characteristic of "location" had an almost perfect agreement among the surgeons (κ = 0.91). Intrarrater reliability: In the partial-thickness posterosuperior tears "location," there was good agreement in tears involving less than 50% of the tendon (κ = 0.74) and moderate in those deeper than 50% of the tendon thickness (κ = 0.58). "Extension" in full-thickness posterosuperior RCT achieved moderate agreement. Within the anterior subscapularis tears, we have a substantial agreement in Lafosse´s Type 1 (κ = 0.73), moderate in Types 2 and 3 (κ = 0.45 and κ = 0.46) and slight agreement in Type 4 (κ = 0.06). The overall kappa summarizing all categories indicated moderate agreement (κ = 0.52). The articular pattern in the partial-thickness posterosuperior RCT "location" had a perfect kappa of 1, while the bursal pattern showed an almost complete agreement (κ = 0.87). In the full-thickness posterosuperior RCTs, we observed fair agreement in C, U, and reverse L configurations and slight agreement in L pattern (κ = 0.18). The overall kappa is 0.44 with a confidence interval of 0.41-0.47. There was substantial agreement in every category and the overall kappa for "retraction" (k = 0.70). CONCLUSION: ISAKOS rotator cuff tear classification system provides sufficient interobserver reliability for communicating among surgeons and for pooling of data from clinical studies. STUDY DESIGN: Cohort study (diagnosis); Level of evidence, 2.

ß-type TiNbSn Alloy Plates With Low Young Modulus Accelerates Osteosynthesis in Rabbit Tibiae.

BACKGROUND: Ti6Al4V alloy, which is commonly used for biomedical applications, has a Young modulus (110 GPa) that is higher than that of human cortical bone (11 to 20 GPa). Using an implant with a material with a low Young modulus that enhances load sharing by the bone even more than those made of Ti6Al4V could be beneficial for bone healing and further reduce the potential for stress shielding. A new ß-type TiNbSn alloy has a low Young modulus of approximately 40 to 49 GPa. However, whether the new titanium alloy with a lower Young modulus is advantageous in terms of fracture healing has not been assessed, and a small-animal model seems a reasonable first step in its assessment. QUESTIONS/PURPOSES: To assess the impact of a TiNbSn alloy plate with a lower Young modulus compared with a Ti6Al4V alloy plate on fracture healing, we evaluated: (1) bony bridging and callus volume, (2) new bone formation and remaining cartilage tissue, (3) osteoblast activity in the callus, and (4) mechanical strength and stiffness of the callus in bending. METHODS: Fracture plates manufactured from TiNbSn and Ti6Al4V alloys, which have Young moduli of 49 GPa and 110 GPa, respectively, were compared. The main reason for using rabbits was the high reliability of the three-point bending mechanical test of the rabbit tibia. Forty-two male Japanese white rabbits weighing 2.8 to 3.4 kg were anesthetized. A 5-cm skin incision was made on the medial side in the mid-diaphysis of the right tibia. Eight-hole plates were used, which were 42 mm long, 5 mm wide, and 1.2 mm thick. Plate fixation was performed using three proximal and three distal screws. After the plate was installed, an osteotomy was performed using a 1-mm-wide wire saw to create a standardized tibial transverse osteotomy model with a 1-mm gap. Bone healing was quantitatively assessed by two nonblinded observers using micro-CT (bony bridging and callus volume), histomorphometry (new bone formation and remaining cartilage tissue), immunohistochemistry (osteoblast activity), and mechanical testing (mechanical strength and stiffness in bending). Measurements on nondemineralized specimens were descriptive statistics due to their small number. Four weeks after osteotomy and fixation, 30 rabbits were euthanized to undergo micro-CT and subsequent mechanical testing (n = 12), histomorphometry and immunohistochemistry with demineralized specimens (n = 12), and histomorphometry with a nondemineralized specimen (n = 6). Eight weeks postoperatively, 12 rabbits were euthanized for micro-CT and subsequent mechanical testing. RESULTS: Intramedullary fracture calluses treated with TiNbSn alloy plates had larger bone volumes and more numerous bridging structures than those treated with Ti6Al4V alloy plates at 4 weeks after osteotomy (Ti6Al4V alloy versus TiNbSn alloy: 30 ± 7 mm 3 versus 52 ± 14 mm 3 , mean difference 22 [95% CI 9 to 37]; p = 0.005; ICC 0.98 [95% CI 0.95 to 0.99]). Histologic assessments demonstrated there was greater new bone formation (total callus: Ti6Al4V versus TiNbSn: 16 ± 4 mm 2 versus 24 ± 7 mm 2 , mean difference 8 [95% CI 1 to 16]; p = 0.04; ICC 0.98 [95% CI 0.93 to 0.99]; intramedullary callus: Ti6Al4V versus TiNbSn: 6 ± 4 mm 2 versus 13 ± 5 mm 2 , mean difference 7 [95% CI 1 to 13]; p = 0.02; ICC 0.98 [95% CI 0.95 to 0.99]) and a higher number of osteocalcin-positive cells (Ti6Al4V alloy versus TiNbSn alloy: 1397 ± 197 cells/mm 2 versus 2044 ± 183 cells/mm 2 , mean difference 647 [95% CI 402 to 892]; p < 0.001; ICC 0.98 [95% CI 0.95 to 0.99]) in the TiNbSn alloy group than in the Ti6Al4V alloy group. At 4 weeks after osteotomy, both bone strength and stiffness of the healed bone in the TiNbSn alloy group were higher than those in the Ti6Al4V alloy group (maximum load: Ti6Al4V alloy versus TiNbSn alloy: 83 ± 30 N versus 127 ± 26 N; mean difference 44 [95% CI 8 to 80]; p = 0.02; stiffness: Ti6Al4V alloy versus TiNbSn alloy: 92 ± 43 N/mm versus 165 ± 63 N/mm; mean difference 73 [95% CI 4 to 143]; p = 0.047). Eight weeks after osteotomy, no between-group differences were observed in the strength and stiffness of the healed bone. CONCLUSION: The results of this study indicate that TiNbSn alloy plate with a lower Young modulus resulted in improved bone formation and stiffer callus during the early phase (4 weeks after surgery) but not the later phase (8 weeks after surgery) of bone healing. CLINICAL RELEVANCE: An overly stiff plate may impair callus formation and bone healing. The TiNbSn alloy plate with a low Young modulus improves the early formation of new bone and stiff callus at the osteotomy site compared with the Ti6Al4V alloy plate in the healing process, which may promote bone repair. TiNbSn alloy may be a promising biomaterial for fracture treatment devices. Further research to address concerns about the strength of TiNbSn alloy plates, such as fatigue life and plate fracture, will be necessary for clinical applications, including mechanical tests to verify fatigue life and validation in larger animals with greater body weight.

Morphology of Glenoid Cartilage Defects in Anteroinferior Glenohumeral Instability.

Background: Glenoid cartilage defects may contribute to anterior shoulder instability recurrence and progression to osteoarthritis, but their morphology remains unknown. Purpose/Hypothesis: The purpose was to determine the shape, size, and location of glenoid cartilage defects and the prevalence and risk factors for cartilage defects in the setting of anterior glenohumeral instability. It was hypothesized that glenoid cartilage defects would be common, would be associated with recurrence of dislocation, and would share similar morphology with glenoid osseous defects. Study Design: Cross-sectional study; Level of evidence, 3. Methods: In this retrospective study, all patients who underwent arthroscopic surgical treatment for anterior glenohumeral instability between January 2012 and May 2019 were included; excluded were patients with documented posterior or multidirectional instability or previous glenohumeral surgery. For each patient, the operative report, arthroscopic images, and preoperative magnetic resonance imaging (MRI) scans were reviewed to determine the prevalence of cartilage injury. For those patients with an Outerbridge grade 3 or 4 defect, the cartilage surfaces on the MRI scans were segmented to make 3-dimensional (3-D) segmentations. From these 3-D segmentations, we measured length, width, and surface area of the glenoid and defect, and the orientation of the defect relative to the superior and inferior poles of the glenoid. A multivariable analysis was conducted to determine correlates with cartilage damage. Results: In 322 patients treated operatively for anterior glenohumeral instability, 38% had a concomitant cartilage defect. The mean cartilage defect was located directly anteriorly at the 3:07 clockface position (range, 2:10-4:05) and encompassed 6.5% ± 3.5% of the glenoid surface area. However, defects ranged up to >56% of glenoid length and up to 27% of glenoid width, and the largest defect encompassed 19.5% of the glenoid cartilage surface area. Patients with a cartilage defect were more likely to be male (P = .031) and to have undergone a concomitant posterior labral repair (P = .018). Conclusion: Cartilage defects were common in patients with operatively treated anterior glenohumeral instability, occurring in 38% of patients. These defects were located directly anteriorly at 3:07, similar to osseous glenoid defects. Future prospective studies with cartilage-specific MRI sequences should be conducted.

Antibacterial Activity of an Anodized TiNbSn Alloy Prepared in Sodium Tartrate Electrolyte.

In this study, we anodized a TiNbSn alloy with low Young's modulus in an electrolyte of sodium tartrate with and without hydrogen peroxide (H2O2). The photo-induced characteristics of the anodized alloy were analyzed for crystallinity and electrochemical conditions with comparisons to the effect with the addition of H2O2. The antibacterial activity was evaluated using methicillin-resistant Staphylococcus aureus and other pathogenic bacteria according to ISO 27447, and time decay antibacterial tests were also conducted. The anodized oxide had a porous microstructure with anatase- and rutile-structured titanium dioxide (TiO2). In contrast, the peaks of rutile-structured TiO2 were accelerated in the anodized TiNbSn alloy with H2O2. The formation of hydroxyl radicals and methylene blue breaching performance under ultraviolet irradiation was confirmed in the anodic oxide on TiNbSn alloy with and without H2O2. The anodic oxide on TiNbSn alloy had a robust antibacterial activity, and no significant difference was detected with or without H2O2. We conclude that anodized TiNbSn alloy with sodium tartrate electrolyte may be a functional biomaterial with a low Young's modulus and an antibacterial function.

Increased external rotation related to the soft tissues is associated with pathologic internal impingement in high-school baseball players.

BACKGROUND: Changes in soft-tissue structures such as anterior laxity and posterior tightness are thought to contribute to the development of pathologic internal impingement in baseball players. Although side-to-side differences in shoulder rotational range of motion (ROM) is commonly used in clinical practice to quantify the soft-tissue changes, the ROM does not accurately reflect the soft-tissue changes because the ROM is affected not only by the soft tissues, but also by the bone. Increased retroversion of the humeral head is often observed in the dominant shoulder of throwing athletes. The purpose of this study was to determine the relationship between the soft-tissue-related (STR) ROM and pathologic internal impingement in baseball players. METHODS: Bilateral humeral retroversion and ranges of glenohumeral external rotation (ER) and internal rotation (IR) were investigated in 81 high-school baseball players. The players were divided into two groups: the internal impingement group (19 players) and the control group (62 players). Humeral retroversion was measured using the ultrasound-assisted technique to assess the bone-related ER and IR. The STR ER and IR were defined as subtracting the amount of humeral retroversion from the measured ER and IR. RESULTS: The side-to-side difference (throwing shoulder - nonthrowing shoulder) in humeral retroversion showed no significant difference between the internal impingement group (6° ± 10°) and control group (11° ± 11°) (P = .064). The side-to-side difference in STR ER was significantly greater in the internal impingement group (12° ± 12°) than that in the control group (1° ± 14°) (P = .002). No significant difference was observed in the side-to-side difference in STR IR between the internal impingement group (-7° ± 16°) and control group (-5° ± 15°) (P = .696). Pathologic internal impingement was significantly associated with the side-to-side difference of STR ER (odds ratio, 1.06 for increase of 1°; 95% confidence interval, 1.02-1.11; P = .008). CONCLUSION: In high-school baseball players, the increased STR ER in the throwing shoulder may be associated with pathologic internal impingement. An increase of 10° in side-to-side difference in STR ER would increase the risk of pathologic internal impingement by 1.8 times.

Impacts of external rotators and the ischiofemoral ligament on preventing excessive internal hip rotation: a cadaveric study.

BACKGROUND: This study examined the biomechanics of preventing excessive internal hip joint rotation related to the hip flexion angle. METHOD: An intramedullary nail with a circular plate equipped with a protractor was installed in the femur of nine normal hips. The circular plate was pulled by 3.15 Nm of force in the internal rotation direction. The external rotators were individually resected, finally cutting the ischiofemoral ligament. The cutting order of the external rotators differed on each side to individually determine the internal rotation resistance. The external rotators were resected from the piriformis to the obturator externus in the right hips and the reverse order in the left hips. Traction was performed after excising each muscle and ischiofemoral ligament. Measurements were taken at 0°, 30°, and 60° of hip flexion, and the differences from baseline were calculated. RESULTS: For the right hip measurements, the piriformis and ischiofemoral ligament resection significantly differed at 0° of flexion (p = 0.02), each external rotator and the ischiofemoral ligament resections significantly differed at 30° of flexion (p < 0.01), and the ischiofemoral ligament and piriformis and inferior gemellus resections significantly differed at 60° of flexion (p = 0.04 and p = 0.02, respectively). In the left hips, the ischiofemoral ligament and obturator externus, inferior gemellus, and obturator internus resections significantly differed at 0° of flexion (p < 0.01, p < 0.01, and p = 0.01, respectively), as did each external rotator and the ischiofemoral ligament resections at 30° of flexion (p < 0.01). CONCLUSION: The ischiofemoral ligament primarily restricted the internal rotation of the hip joint. The piriformis and obturator internus may restrict internal rotation at 0° and 60° of flexion.

Feeder-supported in vitro exercise model using human satellite cells from patients with sporadic inclusion body myositis.

Contractile activity is a fundamental property of skeletal muscles. We describe the establishment of a "feeder-supported in vitro exercise model" using human-origin primary satellite cells, allowing highly-developed contractile myotubes to readily be generated by applying electrical pulse stimulation (EPS). The use of murine fibroblasts as the feeder cells allows biological responses to EPS in contractile human myotubes to be selectively evaluated with species-specific analyses such as RT-PCR. We successfully applied this feeder-supported co-culture system to myotubes derived from primary satellite cells obtained from sporadic inclusion body myositis (sIBM) patients who are incapable of strenuous exercise testing. Our results demonstrated that sIBM myotubes possess essentially normal muscle functions, including contractility development, de novo sarcomere formation, and contraction-dependent myokine upregulation, upon EPS treatment. However, we found that some of sIBM myotubes, but not healthy control myotubes, often exhibit abnormal cytoplasmic TDP-43 accumulation upon EPS-evoked contraction, suggesting potential pathogenic involvement of the contraction-inducible TDP-43 distribution peculiar to sIBM. Thus, our "feeder-supported in vitro exercise model" enables us to obtain contractile human-origin myotubes, potentially utilizable for evaluating exercise-dependent intrinsic and pathogenic properties of patient muscle cells. Our approach, using feeder layers, further expands the usefulness of the "in vitro exercise model".

Retrospective comparison of the surgical results for patients with thoracic myelopathy caused by ossification of the posterior longitudinal ligament: Posterior decompression with instrumented spinal fusion versus modified anterior decompression through a posterior approach.

BACKGROUND: In Japan, approximately 75% of patients with thoracic myelopathy caused by ossification of the posterior longitudinal ligament (OPLL) are treated by posterior decompression with instrumented spinal fusion (PDF) because of its efficacy and safety. To achieve more effective decompression of the spinal cord using a posterior approach, anterior decompression through a posterior approach was developed. However, this technique has a high risk of postoperative paralysis. We have added a couple of ingenuities to this procedure (modified Ohtsuka procedure). This study was performed to report the surgical results of our modified Ohtsuka procedure and to compare them with the results of PDF. METHODS: This was a retrospective case series. From 2008 to 2018, we surgically treated 32 patients: 20 patients treated by PDF (PDF group) and 12 patients by our modified Ohtsuka procedure (modified Ohtsuka group) as the initial surgery. All patients were followed up for at least 12 months. The degree of surgical invasion and patients' neurological condition were assessed. RESULTS: The operative duration and intraoperative blood loss indicated no significant differences (PDF vs. Ohtuska: 507 ± 103 vs. 534 ± 99 min, 1022 ± 675 vs. 1160 ± 685 ml, respectively). The preoperative Japanese Orthopaedic Association (JOA) score was 4.5 ± 2.0 in the PDF group and 3.3 ± 1.4 in the modified Ohtsuka group (p < 0.05). However, the latest JOA score and recovery rate were significantly better in the modified Ohtsuka group than in the PDF group (8.9 ± 1.2 vs. 7.4 ± 2.5 and 70.8 ± 17.6% vs. 44.5 ± 40.2%, respectively). Postoperative paralysis did not occur in the modified Ohtsuka group while four patients had it in the PDF group. CONCLUSIONS: The present study clearly indicated the modified Ohtsuka group showed significantly better surgical outcomes than the PDF group with the recovery rate ≥70%.

Prevalence of pre-existing factors causing spinal cord compression: Is there a difference between patients suffering from cervical spinal cord injury with and without bone injury?

BACKGROUND: Recently, the prevalence of elderly patients suffering from cervical spinal cord injury (CSCI) without bone injury has been increasing in various countries. Pre-existing factors causing spinal cord compression, such as ossification of the posterior longitudinal ligament (OPLL), can increase the risk of CSCI without bone injury. However, no study has compared the prevalence of pre-existing factors between CSCI with and without bone injury. This study aimed to compare the prevalence of pre-existing factors between CSCI with and without bone injury. METHODS: In 168 consecutive patients with CSCI, pre-existing factors including OPLL, posterior spur of the vertebral body, developmental stenosis, disc bulge and calcification of yellow ligament (CYL) were evaluated on imaging studies. The prevalence of each type of pre-existing factors was compared between patients with and without bone injury. RESULTS: The prevalence of pre-existing factors in patients without bone injury (86%) was significantly higher than in those with bone injury (20%) (P < 0.001; odds ratio, 23.9). The most common pre-existing factor was OPLL followed by developmental stenosis, posterior spur, disc bulge and CYL in both groups. OPLL, development stenosis and posterior spur were significantly more common in patients without bone injury compared to those with bone injury (P < 0.01). CONCLUSIONS: Prevalence of pre-existing factors, such as OPLL, development stenosis and posterior spur was significantly higher in patients without bone injury than in those with bone injury. Thus, these pre-existing factors might be a potential risk of CSCI without bone injury.